#Hacer conexion modbus poll to plc verification#

Ensure that the PLC port settings are correct by verification with that PLCвЂ™s programming software. If your network is returning communication errors, test the basic network setup by transferring a new C-more project with Panel Manager settings that match the PLC port settings and a single Numeric Display object addressed to N7:0. Troubleshooting the PLC to Panel Connection

Click on the OK button to close the Channel Configuration window.

Leave all remaining settings as default.

C-more needs a static IP Address to connect to.

For the BOOTP Enable option, click on the checkbox to deselect it.

For the Subnet Mask, enter the same Subnet Mask as set in the C-more Panel Manager.

For the IP Address field, this is the IP Address that you enter in the C-more Panel Manager.

From this configuration window, make the following field selections and inputs:.

From the Channel Configuration window shown below, choose the Channel 1 tab.

In RSLogix 500 choose Channel Configuration in the left navigation window.

To Setup the RSLogix 500 for this PLC, follow these steps:

The C-more panel is the master when communicating with an Allen-Bradley PLC. The following information applies for Allen-Bradley MicroLogix 1100 & 1400 PLCs compatible with C-more Panels using EtherNet/IP (Client) Protocol. Allen-Bradley MicroLogix 11 EtherNet/IP (Client) Protocol Setup